19'' Distribution unassembled racks
RMV series DISTRIBUTION TELECOMMUNICATION AND DATA RACKS DESIGNED FOR INSTALLING PATCH PANELS, ACTIVE COMPONENTS, ETC.
Produced
in sizes 21, 33, 42, and 45U
Width
x depth (mm): 600x600,
600x800, 800x800, and
800x1000
Delivered
unassembled; assembly at
installation site
Easy
and quick assembly
Robust
frame construction,
connected by 24(32) M6x12
screws - for increased
stiffness and stability
Frame
construction; 1.5mm, 2mm
sheet steel
Color
powder coated RAL 7040
(frame, top and bottom
covers) and RAL 7035 (door,
side and rear panels)
Removable
side panels with lock; easy
access to installed devices,
security, and fast
installation and dismantling
Removable
rear panel with lock; rear
door available optionally
Door
with swivel handle lock and
tinted security glass; sheet
steel door available
optionally
Reversible
door - easy re-hanging to
open on right or left (at
installation site)
Door
opening angle 180o
Top
and bottom openings
(420x280mm) for ventilation
unit covered with removable
blank panels
Top,
bottom, and rear openings
for cable entry covered with
removable blank panels
Four
sliding 19" vertical
extrusions
Possibility
to adapt 800mm wide racks
for installation of 21" equipment
Adaptor
DP-RE-01 used for
modification of 19"
accessories for 21" mounting
GND/earthing
kit
Top
frame perforated for
effective ventilation
Ventilation
unit can be installed in top
or bottom frame
Adjustable
feet as standard; castors,
lockable castors, plinth, or
plinth with filter
optionally
Protection
rating IP20; optionally up
to IP54 (delivered
assembled)
Load
rating 300kg
Racks
can be installed in blocks
Standard
equipment:
1
bottom cover
1
top cover
2
side panels with lock
1
front frame with tinted
security glass door with
swivel handle lock
1
rear frame with rear panel
and module for cable entry
