19'' Distribution unassembled racks ECONOMY series (REV)
DISTRIBUTION TELECOMMUNICATION AND DATA RACKS ARE DESIGNED FOR INSTALLING PATCH PANELS, ACTIVE COMPONENTS, SERVERS, ETC.
Produced
in sizes 21 - 45U
Width
x depth (mm): 600x600,
600x800, and 800x800
Delivered
unassembled in 4 packages
(assembled optionally)
Easy
and quick assembly
Construction
from 2mm sheet steel,
connected by 24 screws M6x12
19"
vertical extrusions are
integrated into four
columns, three positions of
setting depth
Load
rating 250kg
Color
powder coated RAL 7035 or
RAL 9005
Front
door with two point swivel
handle lock and tinted
security glass (EN 12150-1);
sheet steel front door
optionally
Side
doors with pivotal hinges
operated from inside;
possibility of opening or
removing
Rear
sheet steel door with two
quarter-cylinder locks (top
and bottom)
Removable
and reversible doors –
easy re-hanging to open on
right or left
Vertical
perforation on front door
for more effective
ventilation
Door
opening angle 135°
Top
and bottom knock-out
openings prepared for cable
entry (300x100mm) and
ventilation unit (420x280mm)
Openings
can be covered with blank
panels DP-BP-120x350 or
DP-BP-480x305
Option
of GND/earthing kit REV-O-EK
(not included)
Top
cover and front door
perforated for effective
ventilation
Ventilation
unit can be installed in top
or bottom covers
Adjustable
feet as standard; castors,
lockable castors, plinth, or
plinth with filter
optionally
Protection
rating IP30
Racks
can be installed in blocks
using connecting kit
REV-O-CF (not included)
Standard
equipment:
1
bottom cover
1
top cover
2
side doors
1
tinted security glass front
door
(EN 12150-1) with two point
lock
